GFCI Outlet Installation

Gragg Electrical Services provides GFCI outlet installation to protect your family from electric shock. Our licensed electricians in East Canton, OH can upgrade your outlets in all required areas.

Top GFCI Outlet Installation Service in East Canton, OH

A GFCI outlet is a life-saving device that is crucial for electrical safety in any home. Gragg Electrical Services specializes in the professional installation of Ground Fault Circuit Interrupter (GFCI) outlets. These smart receptacles are required by code in any area where electricity and water could potentially meet. Our licensed electricians can install new GFCI outlets or replace your old outlets in kitchens, bathrooms, laundry rooms, and garages. This simple upgrade provides critical protection against serious electric shock. We can ensure your home is up to the latest safety standards. For expert GFCI installation in East Canton, trust our team to make your home a safer place. Your family’s safety is our highest priority.

Financing Available For
GFCI Outlet Installation

We offer flexible financing options to make your GFCI outlet installation more affordable. Spread the cost over manageable monthly payments without delaying essential electrical safety. Ask us about our quick approval process and competitive rates today.

GFCI Outlet Installation

One of the great features of a GFCI outlet is its ability to protect other outlets downstream on the same circuit. An electrician can wire a single GFCI receptacle as the first outlet in a series of outlets. This one GFCI will then provide its life-saving ground-fault protection to all the standard, less expensive outlets that are connected “downstream” from it. This is a common and cost-effective way to provide protection for an entire kitchen or bathroom circuit. Our electricians are experts in this “line” and “load” wiring configuration, ensuring the protection is extended correctly.

The installation of a GFCI outlet is a quick and straightforward job for a licensed electrician. The process involves turning off the power to the circuit at the breaker panel and verifying it is de-energized. The electrician will then remove your old, standard receptacle. They will connect the new GFCI outlet, paying careful attention to the line and load terminals if it is being used to protect other outlets. The new outlet is then securely installed in the electrical box. After restoring power, the electrician will use a special tester to verify that the GFCI is functioning correctly and will trip when it is supposed to.

It is important to test your GFCI outlets regularly to ensure they are still working properly. Every GFCI outlet has two buttons on its face: a “Test” button and a “Reset” button. Once a month, you should press the “Test” button. You should hear a click, and the power to the outlet should shut off. You can confirm this by plugging a lamp or a tester into the outlet. Then, press the “Reset” button to restore power. If the outlet does not trip when you press the test button, it is faulty and should be replaced immediately by an electrician.

google
Debbi Cuckler
July 26, 2025

Mike W. Was so kind and was very concerned of our needs. We had a gfi box where the wire had croaded. And it was installed 30 yrs ago. Gragg electric was referred by our neighbor Nate Bergert they was here in 24 hours

google
Greg DeMatteis
February 20, 2025

Gragg Electric came through for us on our FULL GRIP Store Project in downtown Akron. The building was built in 1930 and Gragg took on the challenge. Great work guys!

google
heidi merz
February 15, 2025

This was a residential job to rewire (completely) a 70 year old house, so not an easy task. It took the amount of time I expected. I also expected my house to look like swiss cheese after the work was done. That was not the case at all. They found ways to fish wire that resulted in about 30% of the holes I expected. A new panel replaced a 10 year old panel put in by JENNINGS which was full of water, rust & damage. They replaced the service drop and weather-head. It was a lot of work and I am happy with the completed job. I would call them again for future work. Ask for Sean!

Seth S.
Seth S.
February 11, 2025

Solid choice for local electrical work. Highly recommend if you are in need of a quality electrician. Handles both residential and commercial.

google
Drew Grant
January 10, 2025

A top notch company that is willing to do anything and everything to make you happy. The field team is great to work with, and the communication with the office staff is the best I've come across in a very long time. I build homes for a living, and Gragg hasn't missed a deadline yet and are always one of the neatest sub contractors I deal with. If you're looking for an electrical contractor, this is where you want to be.

google
Seth S.
January 7, 2025

Solid choice for local electrical work. Highly recommend if you are in need of a quality electrician. Handles both residential and commercial.

google
Aiden Frasier
November 26, 2024

Gragg electrical services has been nothing but great for all of our requests. They are timely on services and extremely knowledgeable. Highly recommended for any electrical work needed.

google
Leslie Roop
August 12, 2024

Absolutely the best! Best price, most professional & friendliest ever. From the 1st initial phone call, to our tech Don who was outstanding. Will continue to use them in the future & would highly recommend them.

Alyssa Pimpas
Alyssa Pimpas
March 19, 2024

We had quit a few things that needed done at the house the crew that came out was very respectful! Explained everything they were doing, answered all questions we had, and did an amazing job at everything that needed done . I Will definitely recommend this company to everyone I know.

google
Alyssa Pimpas
March 7, 2024

We had quit a few things that needed done at the house the crew that came out was very respectful! Explained everything they were doing, answered all questions we had, and did an amazing job at everything that needed done . I Will definitely recommend this company to everyone I know.

google
Chris Majors
February 7, 2024

Gragg Electrical Services: They helped us out in a pinch. We had an issue where we need someone out the same day to deal with a parking lot lighting issue. Not only did they come out same day and diagnose the issue. They were able to provide a solution and come out the next day to resolve it. Mind you we had other vendors on this who could not provide the same level of service Gragg Electrical did. I will be using them again for any electrical needs we have. Thank you so much for hard work on this for us.

google
Catherine Ward
December 27, 2023

Don was exceptional! Very quick response time, professional, knowledgeable and super friendly. Our new go-to electrician!

google
a bjornstad
August 14, 2023

I had an electrical emergency! Gragg Electrical sent Don out the same day I called! He handled my emergency, explained everything, and answered all my questions! The cost was reasonable, actually less than expected! I have already referred them to my family and friends and will use them in the future!

google
Ronald Mull
June 9, 2023
google
Sally Mcdaniel
May 15, 2023

A very professional trustworthy company Faith based with true Christian values Technicians able to resolve problems and make recommendations A true customer service oriented company Thank you for a very good repair job

google
Mark Bryant
April 3, 2023
google
Lisa Washington
December 6, 2022

Don came out to diagnose my outlet outage in the kitchens. He reset them and checked the breaker box. He assured me everything was fine. I will definitely use Bragg again and highly recommend Bragg Electric in East Canton OH.

google
Noel Wells
November 2, 2022

Quick responses to any of my questions and cut out to give the estimate the very next day

google
J MacRoberts (Jay)
October 26, 2022
google
Ann Mason
July 14, 2022

Gragg is Best co, I’ve had several electric companies in my home and none of them could resolve my issues! Very intelligent/ knowledgeable! Gragg is now my electricians for life!

google
Jeana Barnett
May 12, 2022

This company is amazing and actually cared that I wasn't able to come home until work was done and rushed to get me scheduled. Truly the best company around. Out of 14 that I called I'm confident I received the best price and service. HIGHLY RECOMMENDED!!!!!!

google
Heather Greynolds
April 21, 2022

I had an issue and they were able to come right out. 150 for the service charge. But it was a power company problem, it's fixed. But appreciated Gragg electrical for being so flexible and professional. Also the technician explained everything to me in a way I understood.

google
Angela Brogan
January 6, 2022
Jeana Barnett
Jeana Barnett
January 3, 2022

This company is amazing and actually cared that I wasn't able to come home until work was done and rushed to get me scheduled. Truly the best company around. Out of 14 that I called I'm confident I received the best price and service. HIGHLY RECOMMENDED!!!!!!

google
Emily Kimball
July 12, 2021

Attention to detail and quality of service is top notch!

google
Zac Wheeler
July 10, 2021
google
Kansas Oz
June 22, 2021

I called them to install a kitchen light, and add light switches, as well as to install some plugs in my basement. While he was there, he also fixed the issue with my outside motion light in the process (as it tied into the same switch plate). The customer service and professionalism for this company is phenomenal. They answer your call and/ or call you back quickly. They communicate exactly when they are coming as they set up an appointment, and called the day of to let me know he was on his way. I strongly recommend this company and will be sure to use them for future electrical needs.

google
Judy Walter
June 20, 2021

Gragg Electric was courteous, fast, efficient and very reasonably priced. Someone you can appreciate when you need electrical work done. Will definitely call them if needed again.

google
Nate Bergert
June 15, 2021

Brandon came right away and provided a quote for work I needed done. David and Zach did the inside work for me and they were very professional and super nice guys. We had a little adventure when they had to enter to attic which unfortunately had a quite large number of winged rats to fight off. These guys are great electricians, but they are pretty brave too 🙂

google
Christina D
May 6, 2021

Brandon and his team were great! I called them when I was in a pinch. He provided fast, detailed service, and kept me informed every step of the way! Definitely recommending Gragg to everyone I know and meet in the future:) Thanks for the help!!

google
Nancy Stinson
February 25, 2021

Gragg's service was first class from their timely estimate to the last inspection! David was very knowledgeable, friendly and got the job done.

google
Marci Gragg
January 23, 2021
google
Arthur Ritchie
September 26, 2020
google
Andrew Mizener
September 1, 2020
google
Keith Krebs
August 3, 2020

Extremely professional from start to finish. Very clear precise plan that was followed through without any issues. Quality work. Gragg will be my go to electricians.

google
Cheryl Warren
December 3, 2019

We have utilized Gragg Electrical for many years!! Would not go anywhere else. They are trustworthy and excellent electricians and genuinely good people!

google
Katrina Angelo
July 13, 2019

Brandon, David and his crew are great!!! They arrived on time and completed my long list of electrical work that needed to be done... this is the 4th time we have used Gragg electric... the prices are very fair as well ! we will never go anywhere else!!! Next comes the inground pool 🙂

google
MARK CHRISTOPHER
July 13, 2019

HIGHLY RECOMMEND THESE ELECTRICIANS

google
Allie Sholley
July 9, 2019

Great work, reliable!

google
Kerri Fernandez
June 21, 2019

Professional. Arrived timely. Explained issues. Nice guys. Reasonable price. We will call them in future for electrical work. Recommend them to anyone looking for an electrician.

google
Aaron Mizener
May 13, 2019

I highly recommend this company. They arrived on time very professional and you got done in a timely manner. This is the second time I’ve used this company and I will be using them again in the future !!

google
Chelsea Breda
May 3, 2019

Gragg electric was a blessing to have do the work for our new construction home. Very trustworthy and did a wonderful job!

google
Thomas Hersman
March 8, 2019
google
William Lloyd
September 6, 2018
google

I just want to say what a joy it was to have Gragg Electrical Services, LLC work on my house today. The electricians were very knowledgeable, friendly and efficient. They cleaned up after when they were done. Everything went great. They took care of all my wants and needs and I had a long list of wishes that they took care of. I highly recommend them. I will be a returning customer. 😀 Thank you Brandon, David and the entire team who made my dreams a reality.

Years in business
5-Star Reviews
satisfied clients
Jobs Completed

Most Common GFCI Outlet Installation Questions

GFCI outlets are one of the most important electrical safety devices in your home. Understanding how they work and where they are needed is key to keeping your family safe. Here are the answers to the most common questions about GFCI outlet installation.

A GFCI outlet works by performing a constant, high-speed balancing act with the electrical current. Inside every GFCI outlet is a small sensor called a current transformer. This sensor precisely measures the amount of electricity flowing out to an appliance on the “hot” wire and compares it to the amount of electricity flowing back from the appliance on the “neutral” wire. In a perfectly operating circuit, these two currents are always exactly equal. The electricity that goes out must come back. The GFCI is designed to look for any deviation from this perfect balance.

If the GFCI outlet detects even a very small difference between the outgoing and returning current, typically as little as five-thousandths of an amp (5 milliamps), it assumes the worst. It assumes that this “leaked” or “lost” current has found an alternative path to the ground. This alternative path could be through a person’s body who has come into contact with a faulty appliance, creating a dangerous ground fault. The moment the GFCI senses this imbalance, it triggers an internal switch that instantly cuts off the flow of electricity to the outlet. This entire process happens in a fraction of a second, typically less than 1/40th of a second.

This incredible speed is what makes a GFCI a life-saving device. It is designed to interrupt the flow of dangerous current long before it can cause a serious or fatal electric shock. A standard circuit breaker in your main panel is designed to protect the wiring from overheating during an overload and is not sensitive enough to detect these small, hazardous ground faults. A GFCI is specifically designed for personal protection, which is why it is so critical in areas where the risk of shock is highest, such as near water.

The National Electrical Code (NEC) has continually expanded the list of locations where GFCI protection is required in a home, based on safety data. The general rule of thumb is that GFCI protection is required in any area where electrical outlets are in close proximity to water or moisture. As of the latest code cycles, this includes a wide range of locations. All 120-volt receptacles in bathrooms, without exception, must be GFCI protected. All receptacles that serve kitchen countertops must also have GFCI protection. This helps to protect against faults in small kitchen appliances used near the sink.

The requirement also extends to many other areas of the home. All outlets installed in a garage or an accessory building like a shed must be GFCI protected. All outlets in unfinished basements and crawl spaces are also required to have GFCI protection. In the laundry room, any receptacle located within six feet of the sink needs to be protected. Furthermore, every single outdoor receptacle, whether it is on your porch, deck, or in your yard, must be GFCI protected. This even includes the dedicated outlet for things like a swimming pool pump.

The reason for these extensive requirements is simple: water and moisture dramatically increase the risk and severity of an electric shock. If you have an older home, it is very likely that it is not up to these current safety standards. Having a licensed electrician from Gragg Electrical Services install GFCI outlets in all of these required locations is one of the most important safety upgrades you can make. It ensures your home is compliant with modern codes and that your family is protected from a common and preventable electrical hazard.

A GFCI outlet and a GFCI breaker both provide the exact same type of life-saving ground fault protection. The only difference between them is their location and what they protect. A GFCI outlet is a receptacle that has the GFCI circuitry built directly into it. It replaces a standard outlet in the wall. A single GFCI outlet can be wired to protect itself, or it can be wired to protect a series of standard outlets that are connected downstream from it on the same circuit. This is a very common and cost-effective installation method.

A GFCI breaker, on the other hand, is a circuit breaker that has the GFCI circuitry built into it. It is installed in your main electrical panel and replaces a standard circuit breaker. A GFCI breaker provides ground fault protection for the entire circuit that it controls. This means that every single outlet, light fixture, or other device connected to that circuit will be protected. This can be a convenient way to protect an entire bathroom or kitchen circuit with a single device. It is also often the preferred method for protecting circuits for hot tubs, swimming pools, and other large, hardwired equipment.

The choice between using a GFCI outlet or a GFCI breaker often comes down to cost and convenience. For retrofitting an older home, installing a single GFCI outlet at the beginning of a circuit is often easier and less expensive than replacing the breaker in the panel. For new construction or for protecting an entire circuit with many outlets, a GFCI breaker might be a more elegant solution. An electrician can help you decide which method is the best for your specific application, but you can be confident that both provide the same high level of personal protection against electric shock.

Yes, the National Electrical Code specifically permits the replacement of an old, ungrounded two-prong outlet with a GFCI outlet. This is a very important and practical safety upgrade for older homes that were built without a ground wire. Installing a GFCI on a two-wire circuit provides excellent protection against electric shock, even though there is no equipment ground wire present. The GFCI’s internal sensor works by comparing the current on the hot and neutral wires and does not rely on the ground wire to do its job. If it detects a ground fault, it will trip and cut off power, protecting a person from shock.

When an electrician installs a GFCI outlet on a two-wire, ungrounded circuit, the code requires that they place a small sticker on the face of the outlet that reads “No Equipment Ground.” This is an important piece of information for the homeowner. It means that while the outlet is protected from a shock hazard perspective, it still cannot provide a ground connection for electronics that require one, such as a computer or a high-end surge protector. Those types of devices need a true ground path to function correctly.

This GFCI installation is a widely accepted and safe method for upgrading old two-prong outlets. It is far superior to the dangerous and illegal practice of simply installing a three-prong outlet on a two-wire circuit, which provides no safety and a false sense of security. It is also much more affordable than completely rewiring the entire circuit with new, grounded cable. If your older home has two-prong outlets, having them replaced with properly labeled GFCI receptacles is the most effective way to improve the safety of your electrical system.

A GFCI outlet that keeps tripping is doing its job; it is detecting a problem that you need to investigate. You should not simply keep resetting it and ignoring the issue. The most common reason for a GFCI to trip is a faulty appliance that is plugged into it. The appliance may have a frayed cord, internal damage, or some moisture in it that is causing a small amount of current to leak, creating a ground fault. The first thing you should do is unplug everything from the GFCI outlet and any other outlets that went dead when it tripped. Then, try pressing the “Reset” button.

If the GFCI resets and stays on, then the problem is almost certainly with one of the appliances you unplugged. You can plug them back in one at a time to determine which one is causing the trip. That faulty appliance should be repaired or discarded. If the GFCI trips immediately after you press the reset button, even with nothing plugged into it, then the problem is likely in the wiring itself. There could be a fault in the GFCI receptacle itself, or there could be a ground fault somewhere in the downstream wiring or another outlet that it protects.

Moisture can also be a common cause of tripping, especially for outdoor or garage outlets. Water getting into the outlet box or into a weatherproof cover can cause a ground fault. In some cases, a GFCI can also become overly sensitive as it ages and may need to be replaced. If you cannot easily identify the cause of the tripping, it is best to have a licensed electrician troubleshoot the circuit. They can find the source of the fault and perform the necessary repairs to ensure the circuit is safe.

It is very important to test all of the GFCI outlets in your home at least once a month to ensure they are providing the life-saving protection you are counting on. Testing a GFCI is very simple and takes only a few seconds. Every GFCI outlet has two small buttons located on its face between the two receptacles. One button is labeled “TEST,” and the other is labeled “RESET.” To test the outlet, you first need to plug a small device, like a nightlight or a phone charger, into it so you can see if the power goes off.

With the nightlight on, firmly press the “TEST” button. You should hear a distinct “click” sound as the internal switch trips, and the nightlight should immediately go out. This confirms that the GFCI’s fault-sensing circuit is working correctly and has interrupted the power. If you press the test button and the light stays on, the GFCI outlet is faulty and is not providing any protection. It must be replaced as soon as possible by a qualified electrician.

After you have successfully tested the outlet and the power is off, the final step is to restore power by pressing the “RESET” button. This should cause the nightlight to come back on. If the reset button does not pop back out or fails to restore power, the outlet may be damaged or improperly wired. Regular monthly testing is a simple habit that ensures your GFCIs are ready to protect you and your family in a real emergency situation. You can also buy a simple, inexpensive plug-in GFCI tester from a hardware store for a more thorough test.

Yes, one of the most useful features of a GFCI outlet is its ability to provide ground fault protection to multiple standard outlets on the same circuit. This is a very common and code-compliant wiring method that saves money and provides widespread safety. A GFCI receptacle has two sets of wiring terminals on the back. One set is labeled “LINE,” and the other set is labeled “LOAD.” The “LINE” terminals are where the incoming power from the electrical panel is connected. The “LOAD” terminals are used to send protected power out to other downstream devices.

An electrician can install a GFCI outlet as the very first receptacle in a string of outlets on a circuit. They will connect the incoming power wires to the LINE terminals. They will then connect the outgoing wires that feed the rest of the standard outlets to the LOAD terminals. By wiring it this way, the GFCI’s protective circuitry now covers not only itself but also every other regular outlet that is connected to its load side. If a ground fault occurs at any of those downstream outlets, the main GFCI outlet will trip and cut off power to the entire protected section of the circuit.

This is why you might sometimes find that an outlet in your bathroom has gone dead, but the reset button on that outlet does not work. The problem is often that another GFCI outlet, perhaps in a different bathroom or in the hallway, is the one that is feeding and protecting that circuit and is the one that has tripped. Our licensed electricians are experts at correctly installing and mapping out these protected circuits to provide efficient and reliable safety for your home.

Yes, without exception, the National Electrical Code requires that all 120-volt receptacles located outdoors must be GFCI protected. This is a critical safety rule because of the high risk of moisture and direct contact with the earth in an outdoor environment. Rain, snow, lawn sprinklers, and even morning dew can create a dangerous situation when combined with electricity. The GFCI protection is designed to prevent a severe or fatal electric shock if you were to use a faulty appliance or an extension cord with damaged insulation outside.

This rule applies to all outdoor outlets, regardless of their location. This includes the outlets on your front porch, your back deck or patio, and any outlets you may have in your yard or garden area. Even if the outlet is covered by a roof, it is still considered an outdoor location and must be GFCI protected. In addition to the GFCI protection, all outdoor outlets must also have a proper “in-use” or “bubble” cover. This type of cover is designed to keep the outlet and the plug dry even when a cord is plugged into it, providing an extra layer of protection from the weather.

If your home has older outdoor outlets that are not GFCI protected, they should be upgraded immediately. This is a simple and inexpensive repair that dramatically improves the safety of your outdoor living spaces. An electrician from Gragg Electrical Services can quickly replace your old outdoor receptacles with new, weather-resistant GFCI outlets and install the proper in-use covers. This ensures your home is safe and code-compliant, so you can enjoy your yard without worrying about a dangerous electrical hazard.

Work With The Top GFCI Outlet Installation Service Near You

Contact Gragg Electrical Services to schedule your GFCI outlet installation. Our licensed East Canton electricians are ready to upgrade your home’s outlets and enhance your family’s safety.